synthvibrations.com » vulcan modulator http://synthvibrations.com synthetic vibes! Tue, 07 Jul 2015 01:40:38 +0000 en-US hourly 1 https://wordpress.org/?v=4.2.38 Cwejman VCO2-RM & STG LPF demo http://synthvibrations.com/cwejman-vco2-rm-stg-lpf-demo/ http://synthvibrations.com/cwejman-vco2-rm-stg-lpf-demo/#comments Thu, 30 Dec 2010 02:35:58 +0000 http://synthvibrations.com/?p=895 Read more →

]]> This is just a short demo of the Cwejman VCO2RM thru the STG Soundlabs “Post  lawsuit ” LPF filter.
The VCO2RM is set on the middle wave (the modulated TRI) modulated by the VULCAN MODULATOR by Livewire.
Each VCO has its indipendent modulation rate.
The 2 vco are mixed by an A138 and then pass thru the STG LPF.

An A145 modulate (sine) the filter frequency.

The filter has 75% resonance and the frequency is between 5-6.

Cwejman & STG LPF by francescopoggianti

]]> http://synthvibrations.com/cwejman-vco2-rm-stg-lpf-demo/feed/ 1 Livewire Vulcan with Sync reset Mod http://synthvibrations.com/livewire-vulcan-with-sync-reset-mod/ http://synthvibrations.com/livewire-vulcan-with-sync-reset-mod/#comments Thu, 12 Nov 2009 14:47:41 +0000 http://synthvibrations.com/?p=583 Read more →

]]> Really interesting video from intellijel youtube channel of the Livewire Vulcan modded with sync reset.

Video not available

Description by intellijel :

Demo of a mod done to the Livewire Vulcan to allow independent reset of the two LFOs.
To the right of the Vulcan you can see a 4HP panel with the two jacks mounted, behind this is a circuit board designed to interface to the Vulcan and process incoming triggers.
Jack1 is normalled to Jack 2 so that one cable can trigger both resets. Modules used: MFB SEQ-01 (provides the triggers) Livewire AFG (single oscillator that is being modulated) QMMG (not doing anything until the later parts where I modulate its in LPG mode) Doepfer VCA (just being used as an attenuator) The SEQ-01 could be replaced by any source of rhythmic triggers including gates from your midi to cv converter.
The demo starts with no sync and simple modulation and then I start to patch more complex triggers and cross mod. Sorry for the poor quality! I forgot to turn on the camera light…. future videos will be better :) Also this mod is not for sale but I can provide instructions… it is not for beginners though. I plan to add switches for selecting mod sources and jacks to patch in external CV to the SUM/DIFF/MAX/MIN circuits

]]> http://synthvibrations.com/livewire-vulcan-with-sync-reset-mod/feed/ 0